Solid State Cooling
At the heart of Immersion is a patent pending solid state cooling system. Solid state cooling technology relies on dissimilar metals joined in circuit within a microchip. When an electrical current is passed through the metals, heat is moved. The result is an instantaneous transfer of an enormous amount of heat.
Immersion works by creating a heat vacuum within your fermenting beer. The solid state cooling engine pulls heat out of the beer, through the hard anodized transfer rod, through the cooling chip, then up to the heat sink where it is fanned off into the ambient environment. No compressors, no glycol, no pumps.
See the video on the right to get an idea of how Immersion and Immersion Pro move heat into and out of your fermenting beer.
Ridiculously Easy to Use
The user interface features just two buttons and two screens. Button up increases the set temperature, button down decreases the set temperature. The two screens give you real time readouts of what the current temperature is within your beer, as well as the temperature that you have set.
Immersion’s rod unscrews to make it the most compact liquid cooler available today.
Cleaning and sanitation is a snap with Immersion. The heat transfer rod is removable for exceptionally easy cleaning and sanitizing. Just drop the rod into your fermenter full of iodine-based sanitizing solution for a few minutes and let it dry.
After fermentation is complete, just use soap and hot water with a kitchen sponge and let it air dry. For deep cleans, a weak solution of powdered brewery wash (PBW) is recommended.
BrewJacket Immersion and Immersion Pro are built with the sole purpose of creating world class beer. From the anodized transfer rod to the patented heat exchange engine to the custom circuit board driving your fermentation, every piece of Immersion and Immersion Pro were precision engineered specifically for low volume craft beer.
We designed BrewJacket Immersion to be future proof. All original cooling-only Immersions are upgradable to the Immersion Pro dual heating / cooling with a new control board. This means that all the latest functionality can be added to Immersion without the hassle of replacing your entire system.
|Head Unit||5.5″ x 5.5″ x 5.5″|
|Rod||1.5″ diameter x 18″ long|
|Jacket||15″ internal diameter x 22″ high|
|0-10º Below Ambient||1º/hr|
|10-20º Below Ambient||0.5º/hr|
|20-35º Below Ambient||0.25º/hr|